Are you looking for a simple and stylish way to showcase your beloved houseplants? At the Curbly office, we’re always searching for innovative and attractive methods to display our green companions. As spring breathes new life into everything around us, our office plants are flourishing like never before, and we believe they deserve a fresh, new look.
Do you want to elevate your indoor garden (pun intended!) but find yourself pressed for time? This DIY plant stand project is the perfect solution! You can complete it in approximately thirty minutes, adding a touch of modern elegance to your home decor without sacrificing your precious time.
This project is incredibly beginner-friendly and requires only a few readily available materials. With a little bit of effort, you can create a beautiful and functional plant stand that will enhance the aesthetic appeal of any room. Ready to get started? Let’s dive in!
Materials You’ll Need
- Wood Round: Choose a size that complements your plant pot.
- 3/4″ Dowel: This will serve as the legs of your plant stand.
- Acrylic Paint: Select your favorite color to personalize the plant stand.
- Foam Brush: For smooth and even paint application.
- Power Drill and 5/8″ Forstner Bit: To create precise holes for the legs.
- Small Screws: To secure the legs in place.
- Felt Pads: To protect your floors from scratches.
- Handsaw or Cutting Tool: To cut the dowel into the desired lengths.
Step-by-Step Guide: Building Your Plant Stand
Step 1: Drilling the Holes
Begin by drilling three equally spaced holes into the wood round. Before you start, dividing the wood round into thirds is crucial for stability. If visualizing thirds is challenging, consider creating a plant stand with four legs instead.
Once you’ve determined the leg placement, measure approximately 1.25 inches from the edge of the round for each hole’s center. Secure the wood round to a stable surface using clamps. Using the 5/8-inch Forstner bit, carefully drill the three holes, ensuring they are deep enough to securely hold the dowel legs.
A quality power drill will make this step significantly easier. Remember to always wear safety glasses when operating power tools.
Step 2: Cutting the Dowel Legs
Next, clamp the 3/4-inch dowel to a firm surface. Carefully cut the dowel into three equal pieces if you’re making a three-legged stand, or four pieces for a four-legged version. The length of the legs is entirely up to you and depends on the desired height of your plant stand.
After cutting, use sandpaper to smooth any rough edges on the dowel legs. This will prevent splinters and ensure a clean, finished look.
Step 3: Attaching Felt Pads
Before assembling the plant stand, attach felt pads to the bottom of each dowel leg. This simple step will prevent scratches and scuff marks on your floors, especially if you plan to move the plant stand frequently.
Felt pads are available in various sizes and shapes, so choose the ones that best fit the diameter of your dowel legs. Simply peel off the adhesive backing and press the felt pads firmly onto the bottom of each leg.
Step 4: Assembling the Plant Stand
Insert each dowel leg into the drilled holes in the wood round. If the fit is snug, gently tap the wood round down using a soft mallet. Be careful not to damage the wood or the dowel legs.
Ensure that each leg is inserted to the same depth to create a level and stable plant stand. If necessary, use a level to check and adjust the legs as needed.
Step 5: Securing the Legs
To prevent the dowel legs from slipping out of the wood round, drill a small screw under each leg. These screws will act as a stop, ensuring that the legs remain securely in place.
Use a level to ensure each leg is sitting at an equal place in the wood round. This prevents the plant stand from wobbling and provides a stable base for your plant.
Step 6: Painting the Legs
Protect the wood round by taping it off with painter’s tape. Then, paint the dowel legs with your chosen acrylic paint. While it might seem easier to paint the legs before assembly, doing it this way prevents scratches during the insertion process.
Apply several thin coats of paint, allowing each coat to dry completely before applying the next. This will result in a smooth, even finish. Once the paint is completely dry, carefully remove the painter’s tape from the wood round.
And that’s it! Your DIY plant stand is now complete and ready to showcase your favorite houseplants.
With warmer weather finally arriving, it’s time to refresh our indoor greenery. Overgrown plants will be transplanted into larger pots, dead leaves will be trimmed, and everyone will receive a fresh supply of soil and fertilizer. Happy spring!
More Simple IKEA-Hack Indoor Plant Stands
DIY Ikea Hacked Plant Stand
IKEA HACK: Simple Wood Slab Plant Stand
I acknowledge that The Home Depot is partnering with me to participate in the ProSpective2018Campaign. As a part of the Program, I am receiving compensation in the form of products and services, for the purpose of promoting The Home Depot. All expressed opinions and experiences are my own words. My post complies with the Word Of Mouth Marketing Association (WOMMA) Ethics Code and applicable Federal Trade Commission guidelines.
Thanks for supporting the brands that make Curbly possible!